60W for ODM MP3450I Instrument Type

1.Output voltage scales:16 2.High Capacity: 60Wh 3.Out current:4.5A Max 4.USB output:5V/1.5A 5.certification:CE,ROSH

I. Application: 

                       Special for industry / instrument / portable devices outdoor operation                          & indoor uninterrupted Power System.

 II.Function Advantages:

   1.Model:MP3450I ( industry & instrument  type )   2.Cell type:Li-Polymer     3.Cell Capacity:60Wh(16200 ~16800mAh)      4.Output  port:Two independent output  port:1 . DC  OUT   2. USB OUT     5.DC OUT Voltage:5V, 5.5V, 6V,6.5V,7.5V,8.4V, 9V, 9.5V,11V,12V,13V, 14V,15V,16V,18V,19V     6.DC OUT current:4A( constant ); 4.5A( Max.)   7.OUT DC/DC  efficiency:92~94%   8.DC OUT capacity:56Wh ( 15200mAh )      9.USB OUT voltage:5.2V   10.USB OUT current:1.5A( constant ) ;  2A( Max)   11.nput Charging Voltage:8~20V     12.Charging Time:About 4~5h    13.Charging method: 1. AC power adapter . 2. Car charger . 3. Solar panel        14.UPS  function:with     15.Pass through charging:with    16.Capacity extended:can extended  capacity  to  100Wh , 150Wh , 200Wh    17.Size:174*84*22.5mm     18.Weight:430g

III.Operation panel: 

IV.Operation guide: 

     1.Set  Voltage method:

        Please adjust output voltage according to the status of DIP switch as below( the DIP switch

        located the top of down case ) : Once the output voltage have fixed setting , it’s not will be

        change even if the Power ON/OFF .

      2.Indoor Application —— working for Pass through charging:

          The AC power adapter will offer power to loading device working and charging loading's  

          internal battery firstly. It will follow charged MP3450I after loading's internal battery has

          charged fully. The MP3450I also will be charged fully at finally. It will total charged fully after

          7~8h by connected as this diagram. if empty of all battery ( MP3450I& loading's internal

          battery). It doesn't matter the loading device is operated or not .  It will auto stop charging

          MP3450I battery.while offer to device's loading current higher than 2±0.2A. ; it will start

          charging MP3450I if  device's loading current less than 2±0.2A. The loading device demand

          power always priority one of support from AC Power adapter.

     3.Outdoor application ————Back-up power for your device:

       Please check loading device demand voltage/current before connected the DC OUT port of

       MP3450I. It will shut down if demand current over MP3450I maximum output 4.5A.

V.Packing accessories:

       

VI. Product clear picture:

 

60W for ODM MP3450I Instrument Type